Removal 25 Shield Assy Ess (Pl9.1.45) - Dell 3130cn Service Manual

Removal 25 SHIELD ASSY ESS (PL9.1.45)

If there are the WIRELESS PRINTER ADAPTER and the HARD DISC on the ELEC-
TRONIC SUB-SYSTEM CONTROL BOARD, remove it before working.
Steps 1 through 5 are for reference. Before removing this component, check that Steps 1 through 5
have been performed.
1) Open the FRONT COVER (PL1.2.1).
2) Remove the FUSER. (Removal 8)
3) Remove the REAR COVER. (Removal 10)
4) Remove the RIGHT COVER. (Removal 11)
5) Remove the LEFT COVER. (Removal 20)
6) Loosen the SCREW KNURLING (PL9.1.44) and open the SHIELD WINDOW (PL9.1.21).
7) Lift the SHIELD WINDOW slightly up to release the four tabs of the SHIELD WINDOW from
the holes of the SHIELD ESS (PL9.1.25)
8) Disengage all the connectors of the ELECTRONIC SUB-SYSTEM CONTROL BOARD
(PL9.1.27).
Continues to the next page.
Version 1 2008.01.08
Chapter 3 Removal and Replacement Procedures (RRPs)
8)
3 - 46
7)
6)
Zna03208KA