Dell 3130cn Service Manual page 619

Replacement 22 ARM ASSEMBLY (PL7.1.98)
4) Replace the SUPPORT LINK L by mating the two holes of the SUPPORT LINK L with the
bosses on the printer.
5) Secure the SUPPORT LINK L using the two screws (silver, tap, 10mm).
6) Mate the fitting hole on the LINK L with the left side fitting hole on the FRONT COVER.
Insert the SHAFT PIVOT and secure with the hook.
Continues to the next page.
Version 3 2008.05.30
Chapter 3 Removal and Replacement Procedures (RRPs)
4)
5)
5)
3 - 142
6)-1
6)-2
Zna03322KB