Dell 3130cn Service Manual page 323

Step
Checking the print cartridge
3
Is the installed print cartridge the DELL cartridge?
Checking the paper
4
Is the installed paper with a new and dry one?
Checking the surface of TRANSFER ASSY.
5 Are there any damages on the surface of TRANSFER
ASSY?
Checking the foreign substance.
Remove the Fuser.
Warning: Start the operation after the FUSER ASSY
has cooled down.
Check the heat roll surface.
6
Are there any foreign substances?
Checking the laser beam path.
7 Are there any foreign substance between the ROS ASSY
and the drum?
Version 3 2008.05.30
Check
1 - 297
Chapter 1 Troubleshooting
Yes
DELL cartridge
Go to step 4.
Pallet Check] in
Go to step 5. paper with a new
Replace the
TRANSFER
ASSY. (Refer to
Removal 4/
Replacement 40)
Replace the
FUSER ASSY.
(Refer to Removal
8/Replacement
36)
Remove the for- Replace the fail-
eign substance ure print cartridge.
No
Replace to the
and print ten
sheets [Test
Print]-[Toner
diagnosis.
Replace the
and dry.
Go to step 6.
Go to step 7.