Fip1.17 009-362 Restart Printer - Dell 3130cn Service Manual

FIP1.17 009-362 Restart Printer

Step
Possible causative parts:
CARTRIDGE ASSY (C) (PL5.1.19)
HARN ASSY CRUM (PL10.1.13)
CONNECTOR CRUM (PL5.1.3)
PWBA MCU (PL9.1.20)
Checking the CARTRIDGE ASSY (C) for installation
1
Is the CARTRIDGE ASSY (C) installed correctly?
2 Does the error still occur when the power is turned ON?
Checking the CONNECTOR CRUM for installation
3
Is the CONNECTOR CRUM installed correctly?
Checking the connectors for connection
Check the connections between the PWBA MCU and
4
CONNECTOR CRUM.
Are P/J31 and P/J 313 connected surely?
Checking the HARN ASSY CRUM for continuity
Disconnect P/J31 from the PWBA MCU.
5
Disconnect P/J313 from the CONNECTOR CRUM.
Is each cable of P/J31 <=> P/J313 continuous?
Checking the CONNECTOR CRUM for shape
6
Is there any damage on the CONNECTOR CRUM?
Checking after replacing the CONNECTOR CRUM
7 Replace the CONNECTOR CRUM.
Does the error still occur when the power is turned ON?
Checking after replacing the CARTRIDGE ASSY (C)
8 Replace the CARTRIDGE ASSY (C).
Does the error still occur when the power is turned ON?
Version 1 2008.02.15
Check
1 - 195
Chapter 1 Troubleshooting
Yes
Reseat the CAR-
TRIDGE ASSY
Go to step 3.
Go to step 3.
Reseat the CON-
Go to step 4. NECTOR CRUM,
then go to step 4.
Go to step 5.
P/J 313 surely,
then go to step 5.
Go to step 6.
Replace the
CONNECTOR
CRUM.
Go to step 8.
Replace the
PWBA MCU.
(Refer to Removal
30/Replacement
14)
No
(C), then go to
step 2.
End of work
Reconnect the
connector(s)
P/J31 and/or
Replace the
HARN ASSY
CRUM.
Go to step 7.
End of work
End of work