Fip-1.P5 Horizontal Band Cross Out (White Stripes In The Horizontal Direction) - Dell 3130cn Service Manual

FIP-1.P5 Horizontal band cross out (White stripes in the horizontal direction)

13
13
Trouble substance
There are some extremely faint or completely non-printed parts. Those non-printed parts cover a wide
area horizontally, perpendicular to the paper feeding direction.
Possible causative parts
- TRANSFER ASSY (PL4.1.1)
- CARTRIDGE ASSY (PL5.1.18(K)/PL5.1.19(C)/PL5.1.20 (M)/PL5.1.21 (Y))
- FUSER ASSY (PL6.1.10)
Before commencing troubleshooting, check the paper transfer path. Make sure there is no foreign
materials on the transfer path, such as staples, paper clips, scraps of paper and so on.
Step
Checking the Horizontal band cross out.
Print the Contamination Check page.
1 Is the image printed correctly?
Checked by [Test Print] - [contamination Check] in diagno-
sis.
Measure the blank line pitch.
Does the blank line pitch match any of the pitches in the
2 printed table chart?
Checked by [Test Print]- [Contamination check] in diagno-
sis.
Version 3 2008.05.30
13
13
Mnt01104KA
Check
13
Random
13
Periodic
Check the print
data which the
problem gener-
Replace the cor-
responding parts.
See [MQ Chart] of
[4.2 Diagnosis
1 - 296
Chapter 1 Troubleshooting
13
13
Yes
Go to step 2.
ated.
Go to step 3.
Test Chart].
Mnt01105KA
No