Fip1.19 009-654-01 Restart Printer - Dell 3130cn Service Manual

Color laser printer
Hide thumbs Also See for 3130cn:
Table of Contents

Advertisement

FIP1.19 009-654-01 Restart Printer

Step
Possible causative parts:
TRANSFER ASSY (PL4.1.1)
CARTRIDGE ASSY (K) (PL5.1.18)
CARTRIDGE ASSY (C) (PL5.1.19)
CARTRIDGE ASSY (M) (PL5.1.20)
CARTRIDGE ASSY (Y) (PL5.1.21)
HARNESS ASSY FRONT COVER (PL13.2.1)
HARN ASSY R SIDE (PL10.1.15)
PWBA MCU (PL9.1.20)
Checking the detail error code.
A detailed error code is displayed by pushing
1
and
key simultaneously.
Is "Code:01" displayed on the LCD?
Checking the TRANSFER ASSY for installation
2
Is the TRANSFER ASSY installed correctly?
3
Does the error still occur when the power is turned ON?
Checking the toner density
Is there the dark color? Compare the density of four colors
4
toner.
Checked by [Test Print] - [Gradation] in diagnosis.
Checking the solenoid in the TRANSFER ASSY for opera-
tion
5
Does the ADC Sensor operate normally?
Checked by [Digital Output] - [DO-37(Control Panel)/CTD
SOLENOID ON(PC)] in diagnosis.
Checking the connectors for connection
Check the connections between the PWBA MCU and
6
TRANSFER ASSY.
Are P/J27, P/J272 and P/J2721 connected surely?
Checking the HARNESS ASSY FRONT COVER for conti-
nuity
7
Disconnect P/J2721 from the TRANSFER ASSY.
Disconnect P/J272 from the HARN ASSY R SIDE.
Is each cable of P/J2721 <=> P/J272 continuous?
Checking the HARN ASSY R SIDE for continuity
Disconnect P/J27 from the PWBA MCU.
8
Disconnect P/J272 from the HARNESS ASSY FRONT
COVER.
Is each cable of P/J27 <=> P/J272 continuous?
Version 2 2008.03.27
Check
key,
1 - 197
Chapter 1 Troubleshooting
Yes
key
Go to step 2.
Go to step 4.
Go to step 4.
Go to step 5.
Replace the cor-
responding CAR-
TRIDGE ASSY.
(Refer to Removal
6/Replacement
38)
Go to step 7.
Go to step 8.
Go to step 9.
No
Go to FIP1.20.
Reseat the
TRANSFER
ASSY, then go to
step 3.
End of work
Replace the
PWBA MCU.
(Refer to Removal
30/Replacement
14)
Go to step 6.
Reconnect the
connector(s)
P/J27, P/J272
and/or P/J2721
surely,
then go to step 7.
Replace the HAR-
NESS ASSY
FRONT COVER.
Replace the
HARN ASSY R
SIDE.

Advertisement

Table of Contents
loading

Table of Contents