5. Abnormal Noise Trouble
5.1 Entry Chart for Abnormal Noise Troubleshooting
Does an abnormal noise arise during
initialization after Power ON?
N
Does an abnormal noise arise during
Standby?
N
Does an abnormal noise arise during
printing?
Version 1 2008.02.15
Refer to the " FIP-1. N1 Operation Mode -
When Power is Turned On" to check for any
foreign material or damage to the components.
Y
Refer to the "FIP-1. N2 Operation Mode - During
Standby" to check for any foreign material
or damage to the components.
Y
Refer to the "FIP-1. N3 Operation Mode - During
Printing" to check for any foreign material
Y
or damage to the components.
1 - 317
Chapter 1 Troubleshooting