Fip1.63 Tray Detached 024-946/007-912 - Dell 3130cn Service Manual

FIP1.63 Tray Detached 024-946/007-912

Step
Possible causative parts:
HARN ASSY R SIDE (PL10.1.15)
SWITCH ASSY SIZE (PL7.1.18)
PWBA MCU (PL9.1.20)
Checking the cassette assy installation
1
Is the cassette assy installed correctly?
2 Does the error still occur when the power is turned ON?
Checking the SWITCH ASSY SIZE
Does the SWITCH ASSY SIZE function normally?
3
Checked by [Digital Input] - [DI-18(Control Panel)/
CASSETTE1 SIZE(PC)] in diagnosis.
Checking the HARN ASSY R SIDE for continuity
Disconnect P/J29 from the PWBA MCU.
4
Disconnect P/J291 from the SWITCH ASSY SIZE.
Is each cable of P/J29 <=> P/J291 continuous?
Checking after replacing the SWITCH ASSY SIZE
Replace the SWITCH ASSY SIZE. (Refer to Removal 18/
5
Replacement 26)
Does the error still occur when the power is turned ON?
Version 1 2008.02.15
Check
1 - 263
Chapter 1 Troubleshooting
Yes
Reseat the cas-
Go to step 3. sette assy, then
Go to step 3.
End of work
Go to step 5.
Replace the
PWBA MCU.
(Refer to Removal
30/Replacement
14)
No
go to step 2.
End of work
Go to step 4.
Replace the
HARN ASSY
R SIDE.
End of work