Table of Contents
Advertisement
Network Interface Controller (NIC Indicator) Codes
The following illustration shows the location of the NIC indicators:
Number
Description
1
Link indicator
2
Activity indicator
The NIC indicators light up as follows to show NIC conditions:
Indicator
Link and activity indicators are off.
Link indicator is green.
Link indicator is amber.
Activity indicator is green and blinking.
Power Indicator Codes
Each power supply on the DMG4000 Gateways has an indicator that shows whether power is present or whether
a power fault has occurred. The following illustration shows where the power supply status indicator is located
(marked by a 1):
Network Interface Controller (NIC Indicator) Codes
Condition
The NIC is not connected to the network.
The NIC is connected to a valid network link at 1000 Mbps.
The NIC is connected to a valid network link at 10/100 Mbps.
Network data is being sent or received.
Page 9
Advertisement
Table of Contents
