Replacement Of Board Assemblies; Replacing The Switch Cable Assembly / Dc Cable Assembly - MUTOH Rockhopper 38 Maintenance Manual

4.3 REPLACEMENT OF BOARD ASSEMBLIES

4.3.1 Replacing the Switch Cable Assembly / DC Cable Assembly

Caution :
4.3.1.1 Replacing the Switch Cable Assembly
Open the Control Box. Refer to "Opening and Closing Control Box"
Step 1 :
Disconnect connector J101 from the Main Board Assembly.
Step 2 :
Remove the power supply cover (2 screws).
Step 3 :
Press the Switch Lock and remove it by pushing it out.
Step 4 :
To install the removed components, reverse the removal procedure.
Step 5 :
The power cable connector must be disconnected before this operation.
No. Description
1 Switch cable assembly
Rockhopper 38 – Maintenance Manual
40
AP-74038, Rev. 1.1, 25/01/05