Pressing A Dial Key To Answer A Call; Closing The Foma Terminal To End/Hold Calls; Placing A Call On Hold When Calls Cannot Be Answered Immediately - NTT docomo STYLE Series Instruction Manual

Switching is not available when another screen is displayed from the
Multi Assistant, while a call is on hold, during a packet transmission,
or when the FOMA terminal is closed. When any function is
activated from the Submenu, switching may not be available.
Any key answer

Pressing a dial key to answer a call

Set Any key answer so that calls can be answered with the
keys other than the ones normally used.
Normal
s 1 to 9, 0, *, t, w, i, m, a, c,
Voice call
{
Videophone s, i
1
In the Custom menu, select [Settings]/[Phone
settings]/[Incoming settings]/[Any key
answer]/[ON].
Set when folded
Closing the FOMA terminal to end/
hold calls
1
In the Custom menu, select [Settings]/[Phone
settings]/[Set when folded].
2
Select the setting/t.
When set to [Hold sound], the set hold tone plays. Hold tone can
be changed. For Videophone calls, the image set in Hold image is
sent to the other party.
When set to [Silent], the set hold tone does not play. For
Videophone calls, the Chara-den or still picture set in Substitute
image is sent to the other party.
Any key answer
–
When set to [Hold sound] or [Silent], open the FOMA terminal to
resume the call.
If a device such as an earphone/microphone (sold separately) is
connected, the call can continue while the handset is closed
regardless of Set when folded.
If the earphone/microphone is disconnected while the FOMA
terminal is closed, the call will become mute when [Silent] or
[Finish call] is set, or the call is put on hold when [Hold sound] is
set. The call resumes when the earphone/microphone is
reconnected or the handset is open.
Earpiece volume
Adjusting earpiece volume
Select from [Volume 1] to [Volume 10].
The volume remains at an adjusted level even when the handset is
turned off or the battery pack is removed.
For details on adjusting the earpiece volume when in stand-by
nP. 86
1
During a call, press o/p.
: Alternatively, select [Earpiece volume] from Submenu during a
Videophone call.
2
Adjust the volume with u.
: After adjusting the volume, wait approximately 2 seconds and
the call display reappears.
On hold
Placing a call on hold when calls
cannot be answered immediately
The other party is charged for the call while on hold.
Continued on next page
61