Flow Of Setup For Data Communication; At Commands; Using Cd-Rom - NTT docomo STYLE Series Instruction Manual

Flow of setup for data communication

This section describes the preparation required to connect
the FOMA terminal to your PC, and use a packet
transmission and 64K data communication. The flow is as
shown below.
Download and install the FOMA communication configuration file
Install from the accompanying CD-ROM
Download from the DOCOMO website and install
Connect the FOMA terminal to your PC using FOMA USB Cable with
Charge Function 01/02 (sold separately) (nP. 323)
Confirm installation
Install DOCOMO Connection
Manager
Set data communication with
DOCOMO Connection Manager
Connect
* Refer to "DOCOMO Connection Manager operation manual.pdf" for
details on setting DOCOMO Connection Manager.
Use "mopera U" (subscription necessary) for the broadband
Internet connection, etc. There is a plan that only charges for
months which the service was used.
Set up a communication without
using DOCOMO Connection
Manager
Packet transmission
64K data communication
*
Connect
FOMA communication configuration file
To connect the FOMA terminal to your PC via FOMA USB Cable with
Charge Function 01/02 for a data communication, installation of the
FOMA communication configuration file from the accompanying
CD-ROM is required.
DOCOMO Connection Manager
Install the DOCOMO Connection Manager from the accompanying
CD-ROM to a PC and make a variety of necessary settings to perform
a packet transmission and 64K data communication connecting the
FOMA terminal to the PC.

AT commands

AT commands are commands used to set the FOMA terminal
functions from a PC. When AT commands are entered from a
PC, the FOMA terminal performs the corresponding operations.
Refer to "Manual for PC Connection" in the accompanying
CD-ROM for details on AT commands.

Using CD-ROM

The accompanying CD-ROM in this manual contains the
software for data transmissions on the FOMA terminal and
the manuals (in PDF format) such as "Manual for PC
Connection" and "Kuten Code List". Refer to the
accompanying CD-ROM for details.
The warning message may appear when a CD-ROM is set in a PC.
This warning is shown by the security setting of Internet Explorer
but does not cause any problem for use.
Click [はい] (Yes).
401