Data Communication - NTT docomo FOMA SO706i Instruction Manual

Table of Contents

Advertisement

Data Communication

Data communication available on the
FOMA terminal
Available data communication between the FOMA
terminal and PCs is classified in 3 categories: data
exchange (OBEX™ connection), packet
communication and 64K data communication.
Data exchange (OBEX™ connection)
You can exchange data such as images, music,
phonebook and mail between the other FOMA
terminal or PC, etc.
PC
iC commu-
nication
(p.259)
PC
FOMA USB Cable with Charge Function 01/02
microSD card (p.243)
DOCOMO keitai datalink (p.329)
326
Infrared data exchange
(p.257)
SO706i
SO706i
Packet communication
Packet communication is charged according to
the amount of data sent and received
data is received at the maximum speed of
*2
3.6 Mbps
and sent at the maximum speed of
384 kbps.
You can also access a corporate LAN connected
to the FOMA network.
Use an access point that supports FOMA packet
communication, such as DOCOMO Internet
connection service "mopera U" or "mopera".
Packet communication is performed via the
FOMA USB Cable with Charge Function 01/02
(optional) to a PC or via a dedicated cable
connection to a PDA.
*1: Note that the communication charge can become very
expensive when large files are sent and received.
*2: The communication speed is 384kbps at maximum for
both sending and receiving in the following cases:
• When you are outside the FOMA HIGH-SPEED area
• When you use access points for "mopera"
• When you use packet communication with
DOCOMO PDA "sigmarion Ⅲ " or "musea"
64K data communication
Regardless of the data amount, 64K data
communication is charged according to the length
of time the line is connected.
Use an access point that supports FOMA 64K
data communication, such as DOCOMO Internet
connection service "mopera U" or "mopera", or
ISDN synchronized 64K access point.
64K data communication is performed via the
FOMA USB Cable with Charge Function 01/02 to
a PC or via a dedicated cable connection to a
PDA.
• 64K data communication is not available for
overseas service.
• When performing packet communications
overseas, use the IP connection (the PPP
connection is not available for packet
communications).
* : Note that the communication charge can become very
expensive when the line is connected for a long time.
*1
, and the
*

Advertisement

Table of Contents
loading

Table of Contents