Removing A Pci Board; Figure 4-29 Removing The Pci Board Screw - Silicon Graphics OCTANE2 Owner's Manual

Removing a PCI Board

If you did not prepare your workstation for removal of a PCI board, go to "Preparing the
Workstation" on page 72, and follow the instructions through removing the PCI module.
Then return to this page and follow these steps:
1. Remove the screw that secures the PCI board to the module, as shown in
Figure 4-29.
If you have a board with an extra-long connector, go to "Opening the I/O Door for
Extra-Long Connectors" on page 94. Otherwise, go to step 2.
Figure 4-29 Removing the PCI Board Screw

Removing a PCI Board

89