Preparing The Workstation; Figure 3-1 Powering Off The Octane2 Workstation - Silicon Graphics OCTANE2 Owner's Manual

Chapter 3: Installing and Removing the Power Supply

Preparing the Workstation

62
Before removing the power supply, you must power off your workstation.
1. Open the cover and press the power button (see A in Figure 3-1) to power off your
workstation.
2. Unplug the power cable (B) from the electrical socket.
3. Press the monitor power switch (C) to power off your monitor.
B
Power cable
Powering Off the Octane2 Workstation
Figure 3-1
Power button
A
C
Power switch