Powering On The Octane2 Workstation; Figure 7-38 Powering On The Octane2 Workstation - Silicon Graphics OCTANE2 Owner's Manual

Powering On the Octane2 Workstation

1. Plug the power cable into a wall outlet (see A in Figure 7-38).
2. Power on the Octane2 workstation.
Press the power button (B).
Close the door.
3. Press the monitor power switch (C) to turn on your monitor.
A
Power cable
Figure 7-38 Powering on the Octane2 Workstation
Removing and Replacing the Plastics: Top and Base
B
Power button
2
1
C
Power switch
197