Accessing The System Maintenance Menu; Figure 8-5 Start Notifier - Silicon Graphics OCTANE2 Owner's Manual

Chapter 8: Troubleshooting

Accessing the System Maintenance Menu

204
You can use the System Maintenance menu for some specialized tasks, such as installing
system software, running diagnostics, recovering the system, entering the command
monitor, or selecting your keyboard layout.
1. Press the power button on the front of your workstation to shut down and power
off, as described in "Shutting Down and Powering Off the Octane2 Workstation" on
page 25.
You can also shut down and power off using the System menu in the Toolchest,
Note:
as described in Chapter 1.
2. After a few seconds, press the power button to power on.
The Start notifier appears, as shown in Figure 8-5
Start Notifier
Figure 8-5
3. Click the Stop for Maintenance button in the Start notifier.
The System Maintenance menu appears.
4. Choose the desired option in the System Maintenance menu.