Table 6-4 Additional References On External Scsi Devices - Silicon Graphics OCTANE2 Owner's Manual

4. If the device is the last SCSI device on the chain, make sure a terminator is plugged
into one of its SCSI connectors.
5. Restart your system and recheck the System Manager listing or hinv listing
(see step 1).
The system automatically recognizes most installed SCSI devices. Table 6-4 provides
additional references for the various external SCSI devices.
Table 6-4 Additional References on External SCSI Devices
Installed device: For Information on:
Floppy drive Formatting and
ejecting a disk
CD-ROM drive Setting up a CD-ROM
other users can access
Additional information
Tape drive Backing up data onto a
tape
Printer Setting up a printer
Additional information
Powering On the Octane2 Workstation
Go to:
"Formatting a Floppy Disk from an External
Drive" on page 146
Toolchest > Help > Online Books > End User
Bookshelf > Personal System
Administration Guide > Setting Up SCSI
Peripherals
Toolchest > Help > Online Books> End User
Bookshelf > Personal System
Administration Guide > Hardware and
Devices
Toolchest > Help > Online Books > End User
Bookshelf > Personal System
Administration Guide > Backing Up and
Restoring Files
Toolchest > System > Printer Manager
Toolchest > Help > Online Books > End User
Bookshelf > Personal System
Administration Guide > Hardware and
Devices
145