Powering On The Octane2 Workstation; Figure 4-53 Replacing The Power Cord And Turning On The Workstation - Silicon Graphics OCTANE2 Owner's Manual

Chapter 4: Installing and Removing PCI Boards

Powering On the Octane2 Workstation

104
1. Face the front of your workstation.
2. Connect the workstation's power cable to an electrical outlet (see A in Figure 4-53).
3. Press the power button (B) to power on your workstation.
4. Press the monitor power switch (C) to power on your monitor.
A
Power cable
Replacing the Power Cord and Turning On the Workstation
Figure 4-53
B
Power button
2
1
C
Power switch