Powering On The Octane2 Workstation; Figure 2-27 Powering On The Octane2 Workstation - Silicon Graphics OCTANE2 Owner's Manual

Chapter 2: Installing and Removing the CPU and Memory

Powering On the Octane2 Workstation

58
1. Plug in the power cable (see A in Figure 2-27).
2. Press the power button (B) on your workstation.
3. Press the monitor power button (C) to turn on your monitor.
A
Power cable
Figure 2-27 Powering On the Octane2 Workstation
B
Power button
2
1
C
Power switch