Assembling The Sheet Document Press - Muratec MFX-2550 Field Engineering Manual

Assembling the SHEET DOCUMENT PRESS

1. Open the Cover platen [1].
2. Lay the Sheet document press [2] on the document glass, leaving 1 mm of clearance from the left corner.
3. Peel off the backing paper from the double-sided tape [3] on the Sheet document press.
4. Close the Cover platen [1].
5. Lightly press down on the Cover platen to affix the SHEET DOCUMENT PRESS [2].
[ 1 ]
[ 3 ]
[ 2 ]
[ 3 ]
5-22