PCB LED-LAMP FBS
1. Remove the Cover platen. (See COVER PLATEN)
2. Remove the ASSY cover top. (See ASSY COVER TOP)
3. Remove the Frame scanner FBS. (See FRAME SCANNER FBS)
4. Release two hooks [1], then remove the Cover lens [2].
5. Release two hooks [3], then remove the ASSY case lamp [4].
6. Remove two screws [5].
7. Remove one screw [6] and disconnect the connector [7], then remove the PCB LED-LAMP FBS [8].
[ 5 ]
[ 8 ]
[ 5 ]
[ 3 ]
[ 6 ]
[ 7 ]
[ 4 ]
[ 3 ]
[ 2 ]
[ 1 ]
5-62