3.6 Clear Programmed Data / User Settings
User programmed information such as address book entries, date, time, Transmit Terminal Identifier
(TTI), Subscriber ID, etc., are stored in the unit's Random Access Memory (RAM) and on the CF
memory card that is attached to the network board.
This function does not clear the machine parameters, memory switches and unique switches.
1. Press <Setting>, <*>, <0>, <2>.
2. Press [Yes].
3.7 All RAM Clear
The All RAM Clear setting will erase all user-programmed information, all documents in memory, and
reset the memory switches and unique switches to factory defaults.
This feature may also be used to try and clear a machine malfunction or lock up. If possible, when the
All RAM Clear is used to reset a malfunction or lock up, it is advisable to print the machine settings,
address book entries to help in reprogramming this information.
1. Press <Setting>, <*>, <0>, <3>.
2. Press [Yes].
The clear modes initialize the following data :
Machine parameter
Memory Switch
Unique Switch
Consumable order sheet
Life moniter
Jounal
Stored images
Serial number
Network Switch
Network Capture
Dial Option Conversion
IFAX Detail Status
: Cleared
Blank : Not cleared
All RAM Clear
User Data Clear
3-86