Frame Drive/Gears - Muratec MFX-2550 Field Engineering Manual

FRAME DRIVE/GEARS

1. Remove the Cover connect. (See COVER CONNECT)
2. Remove the Cover option. (See COVER OPTION)
3. Remove the Cover shield. (See COVER SHIELD)
4. Remove the Cover back. (See COVER BACK)
5. Remove three screws [1], then remove the Ground wire [2].
6. Remove five screws [3], then remove the FRAME DRIVE [4].
[ 3 ]
[ 4 ]
[ 3 ]
[ 1 ]
[ 2 ]
[ 3 ]
[ 3 ]
[ 1 ]
[ 2 ]
7. Remove the GEAR 54/28H [5].
8. Remove the GEAR 73H/23H [6].
9. Remove the GEAR 61H 0.6 [7].
[4]
[ 6 ]
[ 5 ]
[ 7 ]
5-92