Reset Printer Trouble; Cleaning Mode - Muratec MFX-2550 Field Engineering Manual

3.26 Reset printer trouble

This mode clears the service call. Clear the warning when the trouble is settled. If fuser warming up
error is settled, turn the machine OFF and ON following this operation.
1. Press <Setting>, <*>, <4>, <5>.
2. Press [Yes].
3. Turn the power OFF and then ON.

3.27 Cleaning mode

This mode rotate the feed roller and registration roller automatically so that you can clean the surface
of them.
1. Press <Setting>, <*>, <4>, <6>.
2. Select the roller to rotate, and press [ON].
3. Press [Start] to rotate the roller.
3-127