Print Machine Parameters, Memory Switch And; Unique Switch Settings; Factory Functions - Muratec MFX-2550 Field Engineering Manual

3.13 Print Machine Parameters, Memory Switch and

Unique Switch Settings

This function instructs the unit to print a list of the machine parameter, memory switch and unique
switch settings. The list shows the default and current settings for each.
1. Press <Setting>, <*>, <1>, <0>.
2. Select [ON] to enable duplex printing, or [OFF] to disable it.
3. Select [ON] or [OFF] for each settings, and press [Yes].

3.14 Factory Functions

This function provides several machine machina test.
Test list
Test
LED test
LCD test
Panel test
SRAM check
DRAM check
RTC test
Page memory check
Pseudo ring test
Serial number writing
Light on all the LED lamps to check that the lamps are working.
Display test patterns on the LCD to check for dead pixel.
Display the key name on the LCD when the key is pressed.
You can check that the keys are working.
Check that the SRAM is working in case that the registered fax
numbers turn into garbage.
Check that the DRAM is working correctly.
Check also when the memory is expanded.
Factory use only.
Check that the page memory is working in case that the print im-
ages are wrong.
Check the bell of external telephone and the pseudo ring.
Factory use only.
3-104
Contents