Muratec MFX-2550 Field Engineering Manual page 101

Memory switch 07x : Operation
Memory switch 070 :
Initial
bit
Setting
7 0 Display error line
0 : No
1 : Yes
6 0 Tonal line monitor
5
Factory use only
4 0
3 1 Print check message if
power is lost
0 : No
1 : Yes
2 1 Print page if error occurs
during memory transmis-
sion
0 : No
1 : Yes
1 1 Print check message
0 : No
1 : Yes
Factory use only
0 0
Adjust
The number of error lines contained in the received
data will be shown in the LCD.
Allows fax communication to be heard through the
monitor speaker.
bit
If the machine could not hold the memory in an event of power
losses, documents will be lost. When power is restored, a
check message will print.
For easy identification, the first page of a document stored for
memory transmission will print along a check message if an
error occurs during memory transmission.
To notify the user of an error, a check message can be printed
if a communication error occurs.
Usage / Comments
6 5
1 0 ON
0 1 Monitor until DIS outputs
0 0 OFF
3-49
—
—