MOTOR (STEPPING)
1. Remove the DADF cover TX. (See DADF COVER TX)
2. Remove the DADF frame scanner. (See DADF FRAME SCANNER)
3. Remove the DADF guide inner A. (See DADF GUIDE INNER A)
4. Remove the DADF guide inner B equipped with DADF DRIVE. (See DADF GUIDE INNER B equipped
with DADF DRIVE)
5. Remove the Stay drive sensor and Clutch. (See CLUTCH)
6. Remove the three screws [1], then remove the Frame motor [2].
[ 1 ]
[ 2 ]
[ 1 ]
[ 1 ]
7. Remove the Gear 35 A [3].
8. Remove the two screws [4], then remove the MOTOR (STEPPING) [5].
[ 4 ]
[ 3 ]
[ 5 ]
[ 4 ]
5-48