Roller Pickup/Roller Separator - Muratec MFX-2550 Field Engineering Manual

ROLLER PICKUP/ROLLER SEPARATOR

1. Remove the Cover TX side B. (See COVER TX SIDE B)
2. Remove the ASSY shaft separator. (See ASSY SHAFT SEPARATOR)
3. Remove one E-ring [1].
4. Remove one E-ring [2], then remove the ROLLER PICKUP [3].
[ 2 ]
[ 3 ]
[ 1 ]
5. Remove three E-rings [4] and two Bearings D6 8 [5].
6. Remove one parallel pin [6] and the Shaft separator [7].
7. Remove the ROLLER SEPARATOR [8].
[ 4 ]
[ 4 ]
[ 8 ]
[ 5 ]
[ 7 ]
[ 6 ]
[ 5 ]
5-12