MOTOR (STEPPING)
1. Remove the Cover TX side B. (See COVER TX SIDE B)
2. Release the Cable tie [1].
3. Disconnect the connector [2].
4. Remove three screws [3], then remove the Bracket motor ADF [4].
[ 6 ]
[ 4 ]
[ 3 ]
[ 2 ]
[ 3 ]
[ 1 ]
5. Remove two screws [5], then remove the MOTOR (STEPPING) [6].
[ 6 ]
[ 4 ]
[ 5 ]
[ 5 ]
5-17