Muratec MFX-2550 Field Engineering Manual page 202

3.41.3 About error
If an error occurred during updating, a five-digit error code will be displayed. The first digit indicates the ROM
type, the rest indicates the cause of the error.
ROM type
Code ROM type
1 Main
Network
3
4 PCL
0 Could not specify
Error cause
Code Cause / Countermeasure
1000 General error.
1020 Start error detected.
1030 Could not find the ROM file. Check the specified file.
USB memory read error. Check the USB memory is working correctly.
1040
Network board read error. Check the network boar is working correctly.
1050
1060
1070 File read error. Check that the ROM file are stored correctly.
1080
The machine is in use. Update when the machine and the memory are free.
1200
1400 Could not find the ROM file. Check the specified file.
Unable to update. Check the main control board is working correctly.
2030
Start error (1020)
The datailed errror code will be displayed when you press <Setting>, <*>, <9>, <8>. The four-digit numbers
in the parenthesis is the detailed errors for start error.
Third digite error code
Code Cause / Countermeasure
Fax is in use. (Reserved communications are existing.)
0020
0080 Memory is in use.
00A0 Fax and memory are in use.
Last digite error code
Code Cause / Countermeasure
0000 No information
0001 Machine is operating.
0002 Machine is printing.
0003 Machine is operating and printing.
0004 Machine is scanning.
0005 Machine is printing and scanning.
0006 Machine is operating and scanning.
0007 Machine is operating, printing, and scanning.
0008 Machine is communicating.
3-150