Network Capture (Packet Capture) - Muratec MFX-2550 Field Engineering Manual

3.32 Network capture (Packet capture)

You can capture the packet data the machine has sent and received, and download it from the web browser
or sent it to an e-mail address. When you read the data using a packet analyzing tool such "tcpdump", you
can use it as a subsidiary tool to detect the cause of transmission problem.
There are two ways to capture the packet data: capturing from web browser and from the machine control
panel.
3.32.1 Capturing packet data from the web browser
1. Start the web browser on computer.
2. Type the machine's IP address in the URL address field followed by "/service".
e.g. http://192.168.1.10/service
3. Enter login ID and password.
ID
Password
4. Click [Network Capture].
5. Enter the "Capture Parameter". Refer to "Setting details" if needed.
6. Enter the "Output Method". Refer to "Setting details" if needed.
7. Click [Save].
8. Click [Capture Start].
9. Press [File Tx] when capturing has finished.
NOTE
When sending the capture data has succeeded, the captured data will be deleted automatically. When
you do not send the captured data, press [File Delete] to delete them.
: muratec
: service
3-136