SOLENOID
1. Remove the Cover connect. (See COVER CONNECT)
2. Remove the Cover option. (See COVER OPTION)
3. Remove the Cover shield. (See COVER SHIELD)
4. Remove the Cover back. (See COVER BACK)
5. Remove one screw [1], then remove the Bracket SLND [2].
6. Disconnect the connector [3] and cut the Cable tie [4].
7. Remove one screw [5], then remove the SOLENOID [6].
[ 6 ]
[ 5 ]
[ 2 ]
[ 1 ]
[ 4 ]
[ 3 ]
5-88