Muratec MFX-2550 Field Engineering Manual page 209

3.42.3 Convert dialling characters in e-mail gateway functions
The following dialling characters will be converted to certain characters specified here:
Pause (/P)
Tone (/T)
Flash (/F)
For example, when you enter "&A" for "/P" (pause) and specify a fax number like "123/P456", the number will
be converted to "123&A456" and transmitted at e-mail gateway transmission.
1. Open the network service screen. (See page 3-152.)
2. Click [Dial Option Conversion].
3. Enter the characters to which the machine should convert the dialling character.
4. Click [Save].
NOTE
• The Flash character (/F) is not available for USA.
• Up to two characters are able to enter for each dialling character.
• For available characters, see table below.
• If the box is blank, the dialling characters will be overridden when transmitting over the e-mail gateway.
3-157