Adf Drive Gears - Muratec MFX-2550 Field Engineering Manual

ADF DRIVE GEARS

1. Remove the Cover TX side B. (See COVER TX SIDE B)
2. Remove the Cover TX side F. (See COVER TX SIDE F)
3. Remove the Motor (stepping). (See MOTOR (STEPPING))
4. Remove the APS bracket. (See GUIDE INNER A)
5. Remove the Guide inner A. (See GUIDE INNER A)
6. Remove the Gear 18/55 [1].
7. Remove the Gear 24/47 [2].
8. Remove Gear 40 0.6B [3].
9. Remove two Gears 59 0.5 [4].
10. Remove one E-ring [5], then remove the Gear 27 0.5 [6].
11. Remove one E-ring [7], then remove the Gear 27 0.5 ONEWAY [8].
[ 3 ]
[ 8 ]
[ 7 ]
[ 4 ]
[ 2 ]
[ 5 ]
[ 4 ]
[ 6 ]
[ 1 ]
5-19