Counter Information Maintenance; Asset Number - Muratec MFX-2550 Field Engineering Manual

3.38 Counter information maintenance

The machine has the counter data saved on both the SRAM (main control panel) and CF memory card (net-
work board) with its serial number connected. If for some reasons these two serial numbers do not match,
maintenance the data manually.
NOTE
The maintenance screen is normally displayed when the machine is turned on. Follow step 2. To mainte-
nance the data manually, start operation from step 1.
1. Press <Setting>, <*>, <9>, <3>.
2. Check both counter data on main control board and network board.
To copy the counter data from SRAM (main control panel) to CF memory card (network board), press
[MainCopy.]
To copy the counter data from CF memory card (network board) to SRAM (main control panel), press
[OB Copy.]

3.39 Asset Number

This mode is used to input the asset number. You can also input the asset number from the web screen. (See
page 3-160.)
1. Press <Setting>, <*>, <9>, <5>.
2. Input asset number, and press [Enter].
3-143