DADF GUIDE INNER B equipped with DADF DRIVE
1. Remove the Tray document. (See TRAY DOCUMENT)
2. Remove the DADF cover TX. (See DADF COVER TX)
3. Remove the DADF frame scanner. (See DADF FRAME SCANNER)
4. Remove the DADF guide inner A. (See DADF GUIDE INNER A)
5. Remove the Sensor (APS). (See SENSOR (APS))
6. Remove one screw [1] and release the hook, then remove the Cover stamp [2].
7. Remove the six screws [3].
8. Remove one screw [4] and remove the ground wire from its path.
9. Remove the DADF GUIDE INNER B [5] equipped with DADF DRIVE.
[ 3 ]
[ 5 ]
[ 4 ]
[ 3 ]
[ 3 ]
[3]
[ 3 ]
[ 3 ]
[ 1 ]
[ 2 ]
5-44