PCB CONNECT LPH
1. Remove the Cover connect. (See COVER CONNECT)
2. Remove the Cover option. (See COVER OPTION)
3. Remove the Cover shield. (See COVER SHIELD)
4. Disconnect all connectors between the Chassis FBS and PCB main.
5. Remove the Cover back. (See COVER BACK)
6. Open the Cover jam access [1].
7. Remove seven screws [2].
* Note the markings on the Chassis FBS to locate the proper screws.
8. Remove one screw [3], then remove the Chassis FBS [4].
[ 4 ]
[ 2 ]
[ 2 ]
[ 2 ]
[ 2 ]
[ 2 ]
[ 3 ]
[ 1 ]
9. Remove one screw [5], then remove the Cover left [6]. (See PCB NCU)
10. Remove three screws [7], then remove the Tray paper exit [8].
[ 7 ]
[ 8 ]
[ 7 ]
[ 5 ]
[ 7 ]
[ 6 ]
5-81