Pcb Ncu - Muratec MFX-2550 Field Engineering Manual

PCB NCU

1. Remove two screws, then remove the Cover option. (See COVER OPTION)
2. Open the Cover front [1].
3. Remove one screw [2].
4. Remove the Cover left [3] while pressing down on the two hooks.
[ 2 ]
[ 1 ]
[ 3 ]
5. Remove one screw [4] and release the Cable-clamp [5] on the harness. Then pull out the Plate NCU1 [6].
6. Disconnect the connector [7] and remove the PCB NCU [8].
[ 6 ]
[ 8 ]
[ 7 ]
[ 4 ]
[ 5 ]
5-79