Clearing The Unique Switches - Muratec MFX-2550 Field Engineering Manual

3.5.2 Clearing the Unique Switches

Resets the unique switches to factory defaults.
1. From standby, press <Setting>, <0>, <4>.
2. Press [Switch Clear].
3. Press [Yes]. The unique switches will reset to factory defaults.
4. Press <Reset> to return the machine to standby.
Adjustable items :
• Time to output simulated ring tone
000
• Congestion tone detection
• Enable the first tone key
001
• Enable the second tone key
• Enable the dial prefix key
• Display only direct input number on redial list
003
• The period before detecting busytone after dialing
•Including TTI inside the document
010
•The number of times PPR is detected during ECM transmission
• Encoding method
013
• V.8 handshake in real time Tx
015
• Available *, # and space upon F-code box registration
016
• Available *, # and space upon F-code communicating
• Ignore space in F-code ID
• F-code sub-frame off
• Retrieve document
• Ignore F-code bit
• JBIG transmission
017
• Disconnect the line when the transmission speed falls down under
018
7200 bps
• Disconnect the line when the transmission speed falls down under
4800 bps
• Transmission when disable to detect first NSF in real time
transmission
• Number of redial times for archive transmission
019
• Transmit CED signal
020
• Pseudo-ring start time
• Printout the pages completed to receive during receiving into memory
• TCF check time (in 100 ms units)
021
• Document storage method
022
• MMR reception
• JBIG reception
• Receive the junk fax
• Receiving fax in 600 dpi (Super fine)
023
• Encoding method
• Displays the message "No Network Connection."
029
3-59