Muratec MFX-2550 Field Engineering Manual page 181

4. Select the desired parameter by pressing the box.
5. To navigate through the machine parameter settings:
•
The bits are ranged from 7 (left) to 0 (right).
•
Press [ ] or [ ] of the cursor key to move the cursor.
•
Press <0> or <1> on the numeric keypad, or [ ] or [ ], to change the bit value.
•
Press [Enter] to save the setting of the displayed parameter and return to the machine pa-
rameter edit screen.
•
Press [Back] not to save the setting of the displayed parameter.
6. If you want to set other parameters, repeat step 3-5. Otherwise, proceed to step 7.
7. Press <Reset> to return the machine to ready screen.
You can confirm the initial setting of each parameter by the Network Switch List.
The Network Switch List will be printed by pressing [Parameter Print].
Network switch 000: Factory use only
Network switch 001:
Initial
Switch
Setting
7 0
6 0
5 0
4 0
3 0
2 0
1 0
0 1 IP address flag
0 : Send Internet fax charac-
1 : Send IP address
Network switch 002:
Initial
Switch
Setting
7 0 Maximum session times of
SMTP
6 0
5 0
4 0
3 0
2 0
1 0
0 0
Adjust
ter strings
Adjust
Usage/Comments
Choose which to use as HELE/EHLO command
parameter.
Usage/Comments
Set up the maximum session times. The number
between 1 to 32 are available.
00011111 32 times
:
00001001 10 times
:
00000001 2 times
00000000 1 time (default)
3-129