ROLLER TRANSFER
1. Open the Cover jam access [1].
2. Remove the Stopper JAC [2].
3. Remove four screws [3].
4. Disconnect the PCB ERS lamp connector [4], and remove the Guide inner [5].
[ 3 ]
[ 2 ]
[ 4 ]
[ 3 ]
5. Remove two screws [6], then remove the Cover bracket transfer [7] and Guide paper transfer A [8].
[ 6 ]
[ 1 ]
[ 7 ]
[ 5 ]
[ 8 ]
[ 6 ]
5-94