PCB R-SCANNER
1. Open the DADF cover TX. (See DADF FRAME SCANNER)
2. Remove the DADF frame scanner. (See DADF FRAME SCANNER)
3. Remove the three screws [1], then remove the Plate shield DADF A [2].
4. Remove the film harness [3].
5. Remove the four screws [4].
6. Remove the PCB R-SCANNER [5].
[ 4 ]
[ 4 ]
[ 1 ]
[ 5 ]
[ 3 ]
[ 4 ]
[ 2 ]
[ 4 ]
[ 1 ]
[ 1 ]
5-33