Sensor Ds1/Ds2 - Muratec MFX-2550 Field Engineering Manual

SENSOR DS1/DS2

1. Remove the Guide inner A. (See GUIDE INNER A)
2. Loosen one screw [1] and open the Guide inner B [2].
3. Remove two screws [3], then remove the SENSOR DS1 [4] and SENSOR DS2 [5].
Important
When attaching the parts, close the Guide inner B first, then tighten the screw [1].
[ 4 ]
[ 3 ]
[ 3 ]
[ 2 ]
5-21
[ 5 ]
[ 1 ]