Print Data Capture - Muratec MFX-2550 Field Engineering Manual

3.42.6 Print data capture

User can capture and store the PCL Print Commands as a ".PRN File" in CF card on Network Board. This
feature supports concurrent processing to print PCL print data and capture PCL commands.
This feature works with PCL Network Print via LPR, Port 9100 and IPP.
1. Open the network service screen. (See page 3-152.)
2. Click [Print Data Capture].
3. Enter the necessary information.
4. Click [Capture Start] to start capturing the data.
5. Click [Capture Stop] to stop capturing.
Capturing also stops when the window is closed or the machine is turned off.
6. Click "HTTP Download", follow the instruction displayed, and download the captured file.
7. Click [File Delete] to delete the file from the CF card.
3.42.7 Network capture
For details of this future, refer to "3.32 Network capture (Packet capture)".
1. Open the network service screen. (See page 3-152.)
2. Click [Network Capture].
3. Enter the necessary information. Refer to "3.32.3 Setting details" if needed.
4. Click [Capture Start] to start capturing the data.
5. Click [File Tx] to send the captured the data to the specified location.
3-159