Motor (Stepping) - Muratec MFX-2550 Field Engineering Manual

MOTOR (STEPPING)

1. Remove the Cover connect. (See COVER CONNECT)
2. Remove the Cover option. (See COVER OPTION)
3. Remove the Cover shield. (See COVER SHIELD)
4. Remove the Cover back. (See COVER BACK)
5. Remove the Chassis FBS. (See PCB CONNECT LPH)
6. Remove two screws [1], then remove the MOTOR (STEPPING) [2].
[ 2 ]
[ 1 ]
[ 1 ]
5-91