Toner Sensor (Pcb Tos) - Muratec MFX-2550 Field Engineering Manual

TONER SENSOR (PCB TOS)

1. Remove the Cover connect. (See COVER CONNECT)
2. Remove the Cover option. (See COVER OPTION)
3. Remove the Cover shield. (See COVER SHIELD)
4. Remove the Cover back. (See COVER BACK)
5. Remove the Chassis FBS. (See PCB CONNECT LPH)
6. Remove the Cover front. (See COVER FRONT)
7. Lower the Knob pressure [1] to the left.
[ 1 ]
8. Open the Cover jam access [2].
9. Release two hooks [3], and remove the Bracket toner sensor B [4].
[ 2 ]
[ 4 ]
[ 3 ]
[ 3 ]
5-112