Applying The Sheet Document Press (Mfx-1950 Only) - Muratec F-315 Field Engineering Manual

5.3.7 Applying the Sheet Document Press (MFX-1950 only)

1. Open the Cover platen.
2. Peel the separator off the double-coated tape of the Sheet document press.
3. Place the Sheet document press, with the tape upward, on the Pane.
4. Make sure the press edge is 1 mm away from the document reference position of the Cover contact.
5. Close the Cover platen.
Cover contact A
Cover top
1mm
1mm
Sheet document press
5-82 5-82