DADF GUIDE INNER A
1. Open the DADF cover TX. (See DADF FRAME SCANNER)
2. Remove the DADF frame scanner. (See DADF FRAME SCANNER)
3. Cut the tie wrap [1].
4. Remove the four screws [2], then remove the Plate shield DADF C [3].
5. Disconnect all PCB RADF [4] connectors.
6. Remove one screw [5].
7. Remove the four hooks [6] on the Guide harness, then remove the harness from the Guide harness.
[ 2 ]
[ 3 ]
[ 2 ]
[ 2 ]
[ 2 ]
[ 6 ]
[ 6 ]
[ 6 ]
[ 1 ]
[ 4 ]
[ 5 ]
[ 6 ]
8. Remove one screw [7], then remove the Guide harness [8].
[ 7 ]
[ 8 ]
5-36