Muratec MFX-2550 Field Engineering Manual page 143

4. Press [Yes].
5. If you've replaced the transfer roller, select [Replace Transfer Belt].
6. Press [Yes]. The machine goes back to standby mode.
3.9.2 When "Checkout error : XX" message is displayed
To access the printer maintenance modes for determine the cause of the "Checkout error : XX" error
message.
1. Press <Setting>, <*>, <0>, <6>.
2. Press [Service Call].
3. The kind of printer error will be displayed.
NOTE
See "4.3 Checkout error" on page 4-3 for the printer error messages and an explanation of each
are outlined.
3.9.3 Register the e-mail location
To send the service error via e-mail, register the location using this mode.
1. Press <Setting>, <*>, <0>, <6>.
2. Press [Service Call e-mail].
3. Select [Send Service Call E-Mail].
3-91